Remove any large to medium-sized bits of debris from the carpet surface by hand..
All you’ll need is a Phillips screwdriver and a replacement battery (make sure you’re using a genuine Dyson replacement)..This guide is for the original.
Dyson V11 series., which doesn’t include a click-in battery.Some newer versions of the V11 have a click-in battery which is easier to remove and swap..
Step 1: Prepare The V11 Vacuum.Start by making sure the Dyson V11 is unplugged from its charger and isn’t in the docking station.
You should never perform any maintenance on a vacuum cleaner while it’s plugged in.. Next, remove the wand from the vacuum so you’re just working with the main body.
You can use Dyson’s red quick-release button to remove the wand (or any attached tools)..Again, you can rinse the filter with cold water, but.
squeeze dry this filter.. As a general rule, Dyson recommends cleaning both filters on the Ball Animal 2 at least once each month.. You should always allow the filters to try for at least 24 hours before you put them back into the vacuum cleaner.A wet filter will clog faster, may allow bacteria to grow, and risks water being sucked into the vacuum’s motor..
Both the filters on the Dyson Ball Animal 2 are washable, but this may not be the case for other models.Make sure you check the manual before washing a filter.. Don’t Overfill the Dust Canister!.
(Editor: Ultra Wipes)